Quantcast
Browsing all 24339 articles
Browse latest View live

Re: AD9361 ADC Clock Configuration using No-OS

Hi Adrian, By the way, I am using an RX frequency of 499MHz on RX1 because I am prototyping a heterodyne receiver. Ahmed,

View Article


Re: ADL5511 Input Coupling

Agreed; thanks.

View Article


Re: ADV7441a TMDS Equalization

Ah okay. Thanks! Do you you have our ADV7441A evaluation board? Do you see the same behavior there? -Matt

View Article

Re: ADV7441a TMDS Equalization

No. Unfortunately, I do not have an eval board. -Alex

View Article

Image may be NSFW.
Clik here to view.

Re: ADV7441a TMDS Equalization

Unfortunately, the ADV7441A is a very old product and our ability to support it is pretty much limited to what's available on EngineerZone. Have you reviewed the scripts in...

View Article


Re: Question on Programming AD9837 on EVAL board

Moving this to the Direct Digital Synthesis (DDS) community for assistance.

View Article

Re: adv7611 don`t start

There are two ways to configure the ADV7611 and the ADV7511 on the EVAL-ADV7611EBZ:* software driver enabled (software running on ARM CPU configures the ADV7611 and ADV7511)* software driver disabled...

View Article

ADV8005 VSPs and input timing

Hi, I have the EVAL-ADV8005-SMZ evaluation board. I'm using an USB-to-Serial adapter with putty terminal session to communicate with the board.In the ADV8005 Hardware Reference Manual (UG-707), in...

View Article


Re: Backporting ADAU1761 to 3.14, kernel oops when adding dapm dsp routes?

Thank you very much, this works! Funny how you can fix something you stare at for 4 hours in 1 minute

View Article


Any chips that have VGA analog RGB input at 1024x768 and output HD 1920x1080...

                I am trying to find a chip/s that will accept VGA analog RGB input at 1024x768 and output HD 1920x1080 in Digital RGB or to LVDS to drive an LCD display. Does anyone know a chip can be...

View Article

Re: What limits the lower frequency range to 70MHz?

The limit is min VCO frequency 6GHz / max divider ratio 128 = 46.875MHz. The part performance was verified down to 70MHz. If you intend to use the part below 70MHz you need to verify the performance...

View Article

Re: Any chips that have VGA analog RGB input at 1024x768 and output HD...

This application currently requires one IC for analog RGB input and one IC for scaling 1024x768 to 1920x1080. Our EVAL-ADV8003-SMZ-P board includes ADV7842 for analog RGB input and ADV8003 for scaling....

View Article

Re: Any chips that have VGA analog RGB input at 1024x768 and output HD...

To go from 1024x768 to 1080p requires a scaler such as the ADV8005.  But first you have to convert the 1024x768 analog into a digital format with something along the lines of a ADV7850

View Article


Re: AD9361 ADC Clock Configuration using No-OS

Thanks Dragos, I used your SDK workspace, the bitstream and the .lxt and I am NOT having ILA issue. this is inline with what Xilinx proposed 'building the project from scratch'!!!. I will have to get...

View Article

Image may be NSFW.
Clik here to view.

Re: AD7606: wrong voltages on regulators

Hi, I replaced the chip with brand new samples of the ad7606 (8-Channel version), now it works fine.Looks like the floating inputs broke the chip. So all digital inputs of the ad76006 should have...

View Article


Re: position aberration of LP & LC package products after reflow soldering

Hi MN. Pang-san, Thank you for your answer. I'll refer the application note.  Thanks & Regards,

View Article

Re: AD9681 0x100 update

Hi,Sorry.I was misunderstood. In order to update the 0x100 I will need to transfer the 0xFF=0x00?

View Article


Re: two AD5421 from one power source

Hi Lukasz, I would like to ask some questions to clarify the situation. When you say you can't run them both, what do you mean by this? Would you elaborate on this? Also when you say that you cut them,...

View Article

Re: ADF4350 locked but LD LED isn't on

I'm on a Mac right now with my own USB interface. I'm going to get access to a PC this weekend and use ADIsimPLL since I'm also have lock problems when the output isn't an integer multiple of the...

View Article

Re: How to reduce AD9957 ref-clock harmonic spur. ?

Dear KennyG I follow your experiment to use single tone mode, the spurs. Level is the same as in quadrature mode.   In my experiment about lower clock harmonic spurs., I found the harmonic of the VCXO...

View Article
Browsing all 24339 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>