Optical Module Development Platform 2.5 Gbps Transmitter with Digital...
Hello, I am a graduate student from Rochester Institute of Technology, Rochester, NY. I am currently looking for a SFP development board for our fiber optics lab. I happened to come across your...
View ArticleRe: ADV7511W Video Troubleshooting
Also just an added tidbit.. the TV has two timing blocks for 720p.. one has the standard 1650 active rows and another had additional active rows and a bigger horizontal offset. I tried both for kicks...
View ArticleRe: Question about a filter I have
There is normally a small circle in one of the corners of the package. This dot indicates pin 1. The PCB will also normally have a dot to indicate pin 1; normally it is slightly above pin 1.
View ArticleRe: Is it REALLY need to use some physical filter before ADC in AD9467-FMC??
Thanks david for your reply, yes i know the purpose and i meant to say i am trying to integrate reference design of AD9467FMC in my project, and i saw different datasheet in which it is recommended to...
View ArticleClik here to view.
Re: ADIS16488 A, B, C variants
Hello Jim, Here are a couple more important points: The ADIS16488AMLZ falls under the ADIS16488 generic and is calibrated over a temperature range of -40 to +70C.The ADIS16488BMLZ and ADIS16488CMLZ...
View ArticleRe: Is it REALLY need to use some physical filter before ADC in AD9467-FMC??
Hi Cybel, You will always see some LSBs toggling with no inputs to the ADC, but just a clock. If you can disconnect the analog inputs, and just clock the AD9467, and look at the logic output, you will...
View ArticleSweep with ADC control
Hello guyz! Most probably there is something very simple here, but I fail to figure out. Please help!I simply tried to trigger a linear, or log sweep from a pulse generator, which frequency is...
View ArticleRe: ADAU145x missing in Tree ToolBox - SigmaStudio
Great help thanks - I already feel very optimistic about this and think I will stick with the ADAU1452 in the promise of what is to come in the future. This leads me to the next question, how do I...
View ArticleRe: ADIS16305 Gyro stability following shock / drop test
Hi Quenton,While waiting for your clarification response, I reviewed a couple of documents that might be helpful. ADIS16305 Datasheet, page 13, offer GYRO_OFF register provides +/-50 deg/sec of range...
View ArticleRe: Script file for External SYNC mode of ADV7390
Dear Dave-san, Thank you for your supports.And I'm sorry for not enough explanation. I use FEB + ADV7390 EZ-board.NTSC -> FEB(ADV7403) -> YCbCr 8bit 422 with HS/VS(not EAV/SAV timecode) ->...
View ArticleADAS1000 + Fluke PS420 Patient Simulator Connection
Hi,I have an ADAS1000 evaluation board. I would like to connect it to a patient simulator but I am having problems connecting to the DB15 connector as I am unable to find a suitable cable. I bought one...
View ArticleRe: ADAS1000 + Fluke PS420 Patient Simulator Connection
Hi Padraic,Yes I have tried making the connections as you mentioned: RL to V2, V2 to V4. This goes on okay till we hit pin 6 where we have the SHIELD. Even if I ignore the SHIELD there is a problem...
View ArticleRe: ADF4360-7 Schematic
All looks good. Also, see page 9 of the ADF4360-7 evaluation board user guide for reference: http://www.analog.com/static/imported-files/user_guides/UG-104.pdf#page=9
View ArticleRe: SSM 2018 control voltage scaling
Hi Dave, Did you get the fader drawing? Thanks for your interest.
View ArticleRe: AD9222 SPI Configuration
Dear Mr. Blanchard, I sincerely apologize for the lateness of this reply. Register 0x04 = 0x0F and Register 0x05 = 0x0F specify that all eight channels are enabled for actions from subsequent local SPI...
View ArticleRe: ADAU1450 and 1451?
Hi Peter: Those two parts are very similar to the 1452 with lower mips and lower number of ASRC. they will be releasing soon (don't know the exact date), if you design with the 1452, these parts will...
View ArticleRe: Using the AD193x Component in Sigma Studio
Hallo! I have a similar problem like Justin, but an additional question. When this structure works, how can I include the selfboot-EEPROM (it only works in I2C...)?For this issue, on my custom board I...
View ArticleADL5391 Outputs while Disabled
Posted by Viktor Bronder in RF Components on Mar 15, 2014 7:40:35 PM On the ADL5391 there is an Enable Input and the Datasheet doesnt give any Information about what happens to the Output while...
View ArticleRe: ADL5391 Outputs while Disabled
Answer to re-posted question above (originally found at the blog post, http://ez.analog.com/community/rf/blog/2014/03/15/adl5391-outputs-while-disabled): Hi Victor, The output impedance is about 350...
View Article