Upgrading ADE7754 with ADE7854 or ADE7880
Hello, My name is Meir and I am DFAE from Poenix Technoloty in Israel. Satec, one of my castomers, use the ADE7754 for energy metering applications.They are considering upgrading it with ADE7854 or...
View ArticleRe: bf609ez-board problem: Parity error in L1 instruction bank C SRAM
thanks，i've found it already. 2014-02-13 huangqinglele 发件人：mkokaly <analogvm-admin@analog-vm.hosted.jivesoftware.com>发送时间：2014-02-13 16:28主题：[ADSP-BF60x] New message: "bf609ez-board problem:...
View ArticleRe: What beats are the norm for the ADC ADuC706x
That is 24 - 16.2 = 7.8 is noise? But ~ 8 bits = 255 samples (ADC code). In reality, approximately 2000 counts (ADC codes). I use EVAL-ADUC7061MKZ neat (without modifications).
View ArticleADAU1701 I2S In - Stereo Out
Hi There, My project consists of ADAU1701 as a slave feeding I2S signal from another IC (HDMI converter - EP94Z3E). The 1701 receives the I2S and outputs it as an analog stereo. Digital IN, Analog OUT....
View ArticleAD9139, saveral questions
Hi, We can see temperature drift data on AD9139 datasheet Rev.0, as Gain Drift = 100ppm/degC, and Reference Voltage Drift = 30 ppm/degC. When we use external reference, does it mean total voltage gain...
View ArticleRe: Problem with AD536AK rms to DC converter
Hi Balint, We are looking into this. I will get back to you soon. Thanks!Kris
View ArticleRe: AD8021 distortion
Hi ldc, We are currently looking into this. I'll get back to you soon. Best regards,Emman
View ArticleRe: IPT BF537 kit
Hi Asif, I'm sorry to inform you that IP Thinking’s IPT-BF537 KIT is not available any more. This platform was originally developed by a former Third Party, IP Thinking, who are no longer active....
View ArticleRe: AD5791 Software
Hi Perryl, Please, find the source code for the AD5791 evaluation board attached to the following thread. http://ez.analog.com/message/51291#51291 I am afraid we do not provide support for the...
View ArticleRe: AD5791 Resistor Matching
Hi smacleod, The AD5791 offers great tempo specs with a R1and RFB match of less than 1ppm. Regards,Estibaliz
View ArticleRe: Eliminating the cable capaciance
Hi Sean, Thanks for the reply From my experience I know that if the cable connecting the sensor output to board is maintained at virtual ground the cable capacitance will not affect the sensor...
View ArticleRe: FSK Modulator on FMCOMMS1/2
I would really like to move a module into hardware but I am not sure how to add my demodulator to xps project if I can do that I should be able to hit the data rates.
View ArticleMeasuring rolling distance
I have a application where I want to roll a ball into a fixed object that holds an accelerometer and be able to predict how far that ball would have rolled until it comes to a stop. Can the force...
View ArticleRe: AD5621 SPI timing
Hi Ian, So long as no violations are made to the specifications, you are good to go. Regards,Mark
View ArticleRe: Measuring rolling distance
If I understand this correctly, I don't think so. If your accelerometer is in the fixed platform, it will not move and hence, will not respond to the impact. Accelerometers do not measure impact...
View ArticleRe: ADIS16485 driver for Windows
Just checking back in. Are you able to read data that makes sense now or can you offer a specific example that includes device orientation (or motion), along with the register data?
View ArticleRe: AD9361 evaluation board with Xilinx evaluation board...
Jack: The documentation for the FMCOMMS3 at:http://wiki.analog.com/resources/eval/user-guides/ad-fmcomms3-ebz Has a list of supported...
View ArticleClik here to view.
Re: does adv7181 support HDMI-->HVSYNC+RGB(720P,1080P) INPUT?
You misunderstand my question：1：if I use YPbPr, so HD mode for Ypbpr is no problem2：now I use the HSYNC+VSYNC+RGB from other ic output，we use GR mode，7181c said that no valid signal，when we change to...
View ArticleRe: Measuring rolling distance
Thanks, I was thinking there would be some movement that the accelerometer would pick up, but perhaps that distance is too small. Do you know of any good devices that can measure the force, i.e....
View ArticleRe: ADCMP573 latch desable
Hi, Ariel. I just wanted to check on your issue. Have you already resolved it? In case you're still working on this, you may follow the suggestion below. We have noticed that your Hysteresis Control...
View Article