Re: ADV7842-7511(P) eval start-up
So I got VGA to work, using hyperterminal. then I went to component, and send feed through composite (what?) connector green. Got black and white checkered screen, changed the register the tech note...
View ArticleRe: ADV7842-7511(P) eval start-up
Hi Caleb, What version of the PCB are you using? What version of the application binary? It should just be a matter of connecting composite (CVBS) signal to J6 and typing "cvbs" on the command prompt...
View ArticleRe: ADV7842-7511(P) eval start-up
If you are using EVAL-ADV7842-7511P and have not upgraded the application binary, you will probably need to type "startrep" first and then "cvbs". However, since you are getting VGA input to work, it...
View ArticleClik here to view.
Re: How do you change a dspproj file from ADAU1702 to ADAU1701?
Hi, Here's a way to transport your project from the -1702 to the (larger) -1701: Open your original ADAU1702 project.Make a new project with the ADAU1701:Select the original project in...
View ArticleRe: ADV7630 internal EDID issue
Hi Joseph, Thanks for your patience! The ADV7630 hardware expert was able to create a script that works. I verified I could read it correctly on Port A, Port B, Port C, and Port D. :Single 256byte EDID...
View ArticleADV 7511
Hi everybody, i am trying to output some very basic HDMI Data with the ADV 7511, however i don't get any signal on my hdmi screen. The plan is to first of all display a blue square in the lower right...
View ArticleClik here to view.
Re: ADIS16251 vs. ADIS16265 Performance
Hi NevadaMark, Using the settings you've suggested, the data from my latest tests seem to corroborate the values you gave above for the angle random walk of the two sensors. This is despite the fact...
View ArticleRe: Cheapest way to do a NOT gate
Yes, I can't think of anything better than the Zero Comparator. Its output bit selector comes in handy as well.
View ArticleClik here to view.
ADV7623 CEC connection
Hello, I am designing the ADV7623 HDMI tranceiver into a product and understand all of it's operation except for the CEC connection. As I understand it, the CEC connects from a source device (Blu ray...
View ArticleRe: ADIS16251 vs. ADIS16265 Performance
Thank you for sharing these results with us. Great work! We look forward to hearing how things progress for you!
View ArticleRe: ADIS16407 PCB layout
We do not expect the ADIS16407 to exhibit abnormal sensitivity to local EMI sources. Having said that, we have never tried what you are considering but we can offer that any evidence of misbehavior...
View ArticleAD7606 Driver requests probe deferral.
Hi,I am trying to register AD7606 as a SPI platform driver for Intel Galileo board. Kernel 3.8. I have included the AD7606 driver in the kernel build as a built in package, so it tries registering...
View ArticleRe: ADV7619 VSYNC output issue
Thank you for your response. I was able to monitor the mentioned bits. The V_LOCKED_RAW and TMDS_LCK_x_RAW seem to be set all the time. Meanwhile, V_LOCKED_ST should be set only when V_LOCKED_RAW...
View ArticleRe: ADV7181C - Output Data Format
We have a similar application. You may need to run the RS-170 through the CP if you have a video format that is significantly different from the standard SDP output resolutions, which are listed in...
View ArticleADAU1452 SPDIF Input issue
Hi, I've built a custom PCB with ADAU1452 and everything is working quite well except for the SPDIF input.I think I've configured everything the way it should be, but no audio can be heard. My current...
View ArticleRe: BF609: second wake-up issue with hibernate mode
Thank you Aaronwu for the answer. 1-Yes we tested only the wake up with push button but the same problem.2-we are working with ADSP-BF609 EZ BOARD. Please can you provide us your uImage to test it in...
View ArticleRe: AD7960 misbehaves
Hi, More information on reference options can be found on Table 8 of the AD7960 datasheet. If the jumpers are on the their default configuration, your setting of enable bits EN2 = 0, EN1 = 0, EN0 = 1...
View ArticleClik here to view.
Re: 5 or 6 way crossover-H/W recommendation?
You can potentially store a lot of information inside a single interface read/write; it's 24 (or 28, I haven't checked how it gets stored) bits of data where you probably only need 3 or 4 bits per...
View Article