Re: Accelero probleme with ADIS16448
Hello NevadaMark thanks fo the answer you right we use 1 Mhz and not 100Mhz for the clock. I will put a chrongramme of the data with the other axis. Only this axis have this trouble. If we filter this...
View ArticleRe: Have problems with ADF4117
Thank you very must. your answer very very helpful. I solved my problem now. But the new problem is the PLL take long time for lock (2-5s) and frequency is a little bit drift. I think it a problem with...
View ArticleRe: dealing with huge delays in ADSP21489 with sigma studio
Hi John, I have checked up my own ".dyn" file in sigma studio,and it does work as the default ".dyn",except for more code space required.For the default ".dyn" file,only 1224 bytes are needed...
View ArticleADV7511 DDC bus rate
Hello all, EZ URLhttp://ez.analog.com/docs/DOC-1429 Attached file HDMI Transmitter Application Issues.ppt P.4 says that ADV7511 recommends 20KHz of DDC clock frequency.So, we think that HDMI...
View ArticleRe: QPSK GENERATION (MATLAB HDLCODER)
Sir,thanks for the explaination. The symbol timing recovery block implemented in simulink, it is not supported by the system generator.So no verilog code can be generated for it.So can that block be...
View ArticleRe: ADV7612: Problems with some HDMI sources
Hi Dave, thanks for your reply. I still have a few more questions: 1) Nearly all DVD and Bluray players will encrypt their output regardless of the content.Are you aware of a blu-ray/DVD player model...
View ArticleRe: Questions about Programming Code into SPI Flash with ADSP21479
Hi Ning, The same kind of issue is already discussed in other thread in the forum, so I would suggest you to have a look at the thread given below.http://ez.analog.com/message/30197#30197 Please let me...
View ArticleRe: ADV7611: HDMI input signal is not detecting
Hello Guenter, I have checked the following registers status, its working fine,TMDS_CLK_A_RAW[4] - 1CABLE_DET_A_RAW [0] - 1 Output Data: 0001HPA_MAN_VALUE_A[7] - 1 Output Data:...
View ArticleRe: High pass filter issue for sigma3.9 version.
Hi Bob Thank you for your help. Thank you.
View ArticleRe: Communication speed on DDC_bus of ADV7625
Hello, Thank you for your advice. Regards,
View ArticleRe: How can I add more I/O assignments in Sigma Studio
Hello, I am back on this project and I am trying to add the bitstream module to my schematic block however I cannot find it in the toolbox. Is this an addon tool that needs to be loaded? Regards,Richard
View Articlewhat should be the minimum pixel frequency (fcli) for AD9927 14-Bit CCD...
I want to use AD9927 for the ccd sensor s10814. The maximum frequency of ccd sensor s10814 is 5 MHZ. So can i set the frequency of AD9927 at below 5MHz?
View ArticleRe: setting for ADV7511 ARC(audio return channel)
Hi Mike, My SW currently can't handle all CEC protocol message, only ARC message. I know CEC is better to be handled at application level. I have talked to DaveD and signed the required papers, waiting...
View ArticleRe: How to communicate with ADE7754 to make an energy meter with PIC18F2520
i am able display these value on lcd not on led.........i have a demo piece of watt meter using ADE7754 on led.......i am not able to reach at that accuracy....in it renesas 16 bit mcu used......is...
View ArticleRe: Techniques for compensating for effects of temperature on analog...
So you may have to do a piecewise interpolation - see AN-0970http://www.analog.com/static/imported-files/application_notes/AN-0970.pdf
View Articlei2c Scl clock is not generated in ADuC7060?
Hi there, I'm using ADuC7060 microconverter for our product development. Software needs to communicate with tmp432 (slave device) and ADuC7060 (master) board through i2c protocol. I developed the...
View ArticleRe: QPSK GENERATION (MATLAB HDLCODER)
Sir, the first one cannot be used as the blocks in Symbol timing recovery are not supported for netlist generation. How to save the ouput of adc in .mat format? thanks gitanjali
View ArticleRe: ADV7626 DDC bus rate
Hello GuenterL, Thank you for your advice. Please let me know about below our some question. Question１）>The Transmitter DDC clock is fixed by an internal ring oscillator. Why is the reason which DDC...
View ArticleRe: ADV7511 DDC bus rate
Hello all, Is transmitter DDC clock fixed by internal oscillator at ADV7511 (We ask same question at below ADV 7625 thread) ?http://ez.analog.com/thread/41583 If clock is fixed, cyaughn-san answers...
View ArticleRe: AD-FMCOMMS1: How to make a digital signal from ML605 to analog?
Hello Lennen, Are you interested in the wireless part ? Or do you want to use only the signal at the output of the DAC ? If you need a different configuration than the default one, please...
View Article