Re: Difficulty programming AD9915 registers in parallel mode. Can't readback...
Dear Gary, I was inquiring if you had solved your write/read problem. It looks like you are using serial programming, which is fine, it is just a bit conflicting, as this thread started off saying...
View ArticleADuC7061 DAC accuracy in interpolation mode
Hello, I have a question for ADuC7061 DAC accuracy in interpolation mode. Int the datasheet, the explanation for interpolation mode as "In interpolation, the DAC resolution is 16 bits with 14 effective...
View ArticleRe: DVR Low power solution
Hi Gabby We are interested in H264 BP/MP encoder; sized frame @ 15-30fps What is the estimated power in this condition? ThanksMeir
View ArticleIsolated DC/DC Converter and Gate Driver help
I am currently working on a system where the "Source" terminal of a MOSFET will be a floating potential and so I have been looking at ways to drive the gate of the multiple transistors. I've been...
View ArticleRe: Integrating zigbee transmitter with axi_ad9122
The DAC requires 2 inputs (I and Q) each 64 bits wide.Your HDL files should interface to this.If not, you will have to add your own interface conversion module.
View ArticleRe: VC707 FMCOMMS2/3-EBZ linux kernel elf boot error Oops: kernel access of...
Allen, I will test this project and I will tell you the result. There could be some problems with the device tree. Thanks,Dragos
View ArticleRe: Install linux to run on VC707 Microblaze AD-FMCOMMS3-EBZ AD9361 build?
Allen, Let's continue the discussion on the other opened thread: https://ez.analog.com/message/173730#173730 Thanks,Dragos
View ArticleClik here to view.
Re: VC707 FMCOMMS2/3-EBZ linux kernel elf boot error Oops: kernel access of...
Thanks for looking into this!!!
View ArticleRe: External Reference Issue
Robin, I'll likely need to wait until Wednesday or Thursday before I can do the updates. For now, is there anything wrong with the log I sent? It looks like the reference clock is, indeed, set to 10MHz.
View ArticleRe: Problem with the output of iio-oscilloscope
To find/understand the differences between the FMCOMMS2 / 3 boards, it's listed at: AD-FMCOMMS2/3/4/5-EBZ Introduction [Analog Devices Wiki] Let us know if you need more info, and we can add it to...
View ArticleRe: External Reference Issue
Jerediah: Like you said -- everything needs to be in sync. Since we normally are always using the most up to date stuff, when we provide assistance, it's likely things may have changed, or if they are...
View ArticleRe: AD9361 are 12 bits sufficient for Lte Macro cell application?
eNodeB/Macro basestation implementation is the aplication of interest to me. If I understand your answer correctly, the chip has been used for commercial LTE eNodeB/basestation at 5MHz bandwidth. But...
View ArticleRe: How to control HSC-ADC-EVALEZ with Matlab
Hello UmeshJ, Are the Matlab control files of HSC-ADC-EVALCZ compatible also with HSC-ADC-EVALEZ.Thank youSaid FARAH
View ArticleADV7612 ADV7619 power saving
Hello,I would like to know if there is some tricks to save some power when the device is operating normally. We have included these parts on a design where power consumption is critical. Power-down...
View ArticleRe: Does ADI have "Linux driver" on AD9548?
Paul: Sorry I missed this -- we do have Linux drivers for many of the clock parts, including the AD9548. linux/ad9548.c at 03f00b8bebef7ed5828ae1fb92b4c3afa4960c56 · analogdevicesinc/linux · GitHub
View ArticleHSC-ADC-EVALEZ controlled with Matlab?
Hi all, I'll buy AD9656 Eval Board, a four ADC channels with HSC-ADC-EVALEZ. My question is if the control files of the HSC-ADC-EVALCZ by matlab are compatible with HSC-ADC-EVALEZ. If not,...
View ArticleClik here to view.
Re: Need to cool for amplifier module package ?
Your questions are dependent on your specific application, PCB material, thickness and area of metallization on the PCB, off board heat sinking, heat load presented by the device, and ambient air...
View ArticleRe: ADV7842 Auto-Detect
Ok, TMDS_PLL_LOCK would seem to be for the HDMI. I can reliably tell that with DE filter locked (HDMI map register 0x7[5]). I have tried some of the other "RAWS" like CP_LOCK_RAW for use with the...
View ArticleRe: ADV7180 adds black and white frame to my video output
But if the output timing is wrong, shouldn't i observe the same frames even if i am displaying black image?Because if just replace active video with black pixels, all frames disappear.Or do i...
View Article