GNU Radio 3.7 drivers for AD-FMCOMMS1-EBZ
Hi,I'd like to get the AD-FMCOMMS1-EBZ board working with GNU Radio 3.7. Are there any drivers developed by Analog Devices? I'd like to run it with the Xilinx ZC702 evaluation board. I can build GNU...
View ArticleI2CWSD for Production
Hi , Could you please let me know if i can use I2CWSD for programming with out closing the application .Like Configure -> Start every time when we need to program a new board . Thanking you With...
View ArticleRe: Instrumentation amplifier
Hi Kris, Thank you for response. My customer needs the low flicker noise at low gain because they use the gain between 1 to 5.Their main requirement is to have lower flicker noise than 10nV/sqrt(Hz) at...
View ArticleRe: ADFMCOMMS1
yes i have done that too.the result is same.Have you seen the output of Local oscillator on oscilloscope ??
View ArticleRe: ADFMCOMMS1
bro for some reason i cant get the edk design to run,after i am done generating .ngc files and .v files using coregen and copying them to their corresponding folders,the design builds smoothly but in...
View ArticleRe: ADFMCOMMS1
what is this software that you are using right now???...have you tried calling daciq correction function???....i see alot of noise in your output...although its an envelope but its not looking as much...
View ArticleClik here to view.
Re: Issue with my ad7609, busy signal o/p..
Hi Steven, Thankyou for your response.1.StevenX wrote:Could you make the issue more clear ? After power up, one CONVST pulse is applied, the BUSY keeps high forever, right?This problem is solved. No...
View ArticleRe: ADFMCOMMS1
i am using chipscope for seeing output of ADC channel....but i would like to explore this software that you are using right now in the attachment pictures
View ArticleRe: ADFMCOMMS1
answer to both you questions with confidencejust checked...the LO is giving a very fine 122.88 Mhz sine wave and please read the following documentation....you can clearly find the answer to your...
View ArticleRe: Video Decoding & Compression
Hi Sunil, I believe the Blackfin guys have IP that can do this from 3rd parties listed here: http://www.analog.com/en/third-party-developers/processors-dsp/content/search.html I would imagine that IP...
View ArticleRe: ADV7511 Full Data Sheet
Hi Meir, That is not a standard format so standard PAL scripts might be ok but will probably confuse the display. What are you using for a display? It's unlikely any HDMI display would display your...
View ArticleRe: Diverting Low Level Audio
Hello Byron & Miguel, I've run some tests on the new algorithm -- it compares favorably to the discrete implementation first described at:http://ez.analog.com/message/122872#122872...
View ArticleRe: Regarding v4l2 drivers of ADV7842 and ADV7611
Hi Ronak, I have no idea of that is available but it's probably a better question for our Linux driver forum here: http://ez.analog.com/community/linux-device-drivers Dave
View ArticleRe: Can ADV7611 output 30Hz video?
Hello, Nope-- ADV7611 is not a scaler or frame rate converter. What comes in is what goes out. ADV8003 can do that though. Dave
View ArticleRe: ADV7612 ADV7510 Handshake Failure
Thanks for lettings us know. Happy New Year! Dave
View ArticleAD8232 Leads Off Detection Question
Hello, I am using the AD8232 in a Bluetooth Low Energy Heart Rate Monitor Application. I am currently in the process of hardware verification of the prototype boards. I am currently using two resting...
View ArticleRe: AD9361 low frequency operation
The limitation is VCO min freq of 6GHz and max synthesizer divider ratio of 128 (6GHz/128=46.875MHz).However, device was characterized down to 70MHz.
View Article