Hi
I am trying to make a Digital Voltage control Knob remotely to change the Output voltage 0-12V DC with 1 Amps driving power.
Already i wrote the firmware to change the Voltage remotely and now i am able to change only 0-3.3V(0-5V) at AD5160 'W' Pin.
But my requirement is 0-12V DC swing with 1 Amps output. The AD5160 can't withstand more than 20mA and 5.5V max.
My issues.
1.How to use this AD5160 to make 0-12VDC Swing ?
2.How to make a Source driving of 1 Amps in this 0-12VDC?
3.I was asked to make a Universal Voltage Changer upto +12VDC. i.e. If i give 5VDC at Vin pin , it must Swing from 0-5VDC.
in other time, if i give +9V in Vin it must swing 0-9VDC. So below +12V, it must work in any voltage to level/swing it to the
Vout = 0 to Vin.
Kindly help me to complete this, since i am in urgent pressure to complete this.
Thank you