Hello all,
We use EVAL ADV7612-7511.
24LCS22S_JP1 and JP2 of U34 are open in circuit design document（EVAL-ADV7612-7511_rev0p1_schems.pdf） P.5
Signal name DDCA_SDA and DDCA_SCL is used when these are connected to ADV7612 directly and image can be displayed correctively.
Image can be displayed even if 1-2 of JP1 and JP2 is conneted thorugh jumper pin.
Please let me know your advice.
1. is data communicated by ADV7612 DDCA_CLA and DDCA_SDA even if EDID memory is not used
2. Does we need EDID memory in the case of DVI connection ?
Regards,